Monday, 27 August 2012
You will need :
Sockets and wrenches
Something to raise the bike on and straps to steady it.
Angle grinder or file
A chain breaker/riveter (Or a pin punch, centre punch, club hammer and ball pein hammer).
A set of new sprockets and a chain.
I used a carbo strap under the wood and over the seat to hold the bike steady as the rails are a bit narrow and I will be using a fair bit of muscle on some of the bolts. It's always better to take an extra minute to make sure things are safe.
When it's ground flat like in the pic, you can use the chain breaker tool or, like I did, pin punch the rivets until the link drops out and you can strip the manky old chain away.
Most chains come with a rivet link and a clip on link with grooves in. I never use the clip on link, I don't think theyre safe with an o ring chain, so I just carry them in my tool roll incase I ever have a chain break and have to do a quick fix to get me home, but it's your bike, your choice.
That's it! Tighten everything up, get a fat mate to sit on the bike and check for about half an inch of play in the chain and you're ready for the road.
Have fun out there.